FITTING TERMS
Glass Rack Installation
Our installation terms are designed to make the installation of your Top Fleet product to go as smoothly as possible.
These terms are effective from 01/01/2011. Call now
for more information on our services in Bilston.
Terms & Conditions
The Specification of Your Vehicle
The quotation has been based on information, you, the customer have supplied. Costs will be incurred if our products need to be altered or remanufactured at the time of fitting due to incorrect information supplied. Therefore it is in the customer’s interest to ensure this quotation is 100% accurate and that the product will fit the measurements of the vehicle. Also, please advise us of any height restrictions OR VEHICLE MODIFICATIONS such as:
- Beacons
- Glazed panels
- Tailgate rear door
- Additional side loading
- Doors
- Other additional equipment.
It may be possible to re-quote and build a bespoke system to meet your requirements.
Installation Time
Please insure that you arrive by the agreed time printed on your quotation/order. Late arrival may result in a rescheduled fitting time to maintain the fitting time of the next vehicle.
Approximately 2-3 Hour Fitting Time
The fitting time for a single racking system
and standard roof racking system on most vehicles is approximately 2-3 Hours. However, if our fitting technicians do not have clear access to the necessary fixing locations for the rack, the fitting will take longer.
Safe Working Area (Mobile Fitting)
A safe and secure area must be provided where mobile fitting has been requested. This area must be a safe distance away from public roads and highways, on level ground and away from unauthorised personnel. A 240V power supply is also required. These conditions must be adhered to. The mobile fitting team reserves the right to refuse to fit a vehicle where they feel it is a hazard to themselves or others. This service is available in Bilston and across the nation.
Ensure Easy Access
Please ensure that all internal obstructions are removed from the area where our product is to be fitted.
The removal of all internal obstructions must be done prior to arrival.
This includes all ply-lining and internal racking
(if fitted) from the panels where our glass rack is to be installed.
Failure to do so will incur a cost of £100.00 + VAT
Ensure Sufficient Work Space
Our technicians also need sufficient room to work. We therefore ask that either the van should arrive empty or have sufficient room to work in. Top Fleet will not be responsible for any damage caused to the vehicle or its contents due to insufficient working space.
Important
It is extremely important that these requests are adhered to as they are designed to make the fitting process of your new glass rack go as smoothly as possible. The result of a vehicle not in the requested condition will lead to delays in the fitting process and will incur extra costs.
From April 2013, to comply with Whole Vehicle Type Approval, your vehicle must be registered before any modifications can be made to it. Simply put, your vehicle must have registration plates prior to us installing your equipment.
Top Fleet VSS Group Ltd. will take no responsibility for any costs or damages arising from these aforementioned conditions of fitting. If there are any queries about these terms please call 0845 500 8800.
Watch our Glazing Vans in Action...
"Good quality rack for a fair price with good workmanship and friendly sales team, with thanks"
Dave - Cutty Glass
For more information, do not hesitate to get in touch with the team today.
